Cedar Shake Roof Replacement With Solar Flashing in Steele Creek

Aerial view of the old weathered cedar shake roof before replacement
Before: the original cedar shakes, weathered gray
Aerial view of the finished cedar shake roof with the solar array installed
After: new cedar shakes with the solar array in place

This large craftsman-style home in Steele Creek got a complete cedar shake roof replacement, including the main house and the guest house. The homeowners were also adding a solar system, so we coordinated with their solar contractor to remove the old solar flashings and install new ones properly in the new shakes before the array was set. We completed the roof in summer 2022.

Project Details

  • Location: Steele Creek, Charlotte, NC 28278
  • Service: Full cedar shake roof replacement
  • Roofing: New cedar shakes over synthetic underlayment
  • Solar: Coordinated with the homeowners’ solar contractor; we installed the solar mount flashings
  • Completed: Summer 2022

Before

After years of sun and rain, the original shakes had weathered to gray and were at the end of their life.

Large craftsman-style home in Steele Creek with its weathered original cedar shake roof
The home before the new roof

The Install

A roof this size goes section by section. We tore off one area at a time, dried it in with synthetic underlayment the same day, and laid the new cedar shakes, so the house was never left open.

Aerial view of the cedar shake roof replacement in progress, with the guest house finished and the main roof dried in
Mid-project: guest house finished, main roof dried in and underway
New cedar shakes going on over synthetic underlayment
New shakes going on over underlayment
Cedar shakes and roofing materials delivered to the job
Cedar shakes and materials on site
Finished section of the new cedar shake roof
A finished section of the new cedar shake roof

Working With the Solar Contractor

Solar on a roof means dozens of bolts going through it. Every one of those mounts is a potential leak if it isn’t flashed right, and on cedar shakes the flashing has to be woven into the courses, not just sealed on top. Rather than have the panels go up on top of flashings that weren’t built for the new roof, we worked with the homeowners’ solar contractor: we removed the old flashings and installed new solar mount flashings in the shakes as we went, and the solar crew set their racking and panels on top.

That coordination protects the homeowner twice: the roof stays watertight at every mount, and nobody has to pull panels later to chase a leak.

Close-up of a solar mount flashing woven into new cedar shakes
A solar mount flashing woven into the new shakes
Solar mount flashings and racking rails installed on the new cedar shake roof
Mounts and racking rails on the new roof

What We Did

  • Removed the old cedar shake roof in sections
  • Installed synthetic underlayment
  • Installed new cedar shakes on the main house and guest house
  • Removed the old solar flashings
  • Installed new solar mount flashings woven into the shakes
  • Coordinated with the solar contractor so racking and panels went on after the flashings
  • Cleaned up and hauled away all debris

Where This Project Is

We replace and repair roofs throughout Steele Creek and southwest Charlotte. See our specialty roofing or our work in Steele Creek.

Adding Solar to a New Roof?

Call or text us at (704) 960-8394, or request a free estimate at roofsbytaylor.com.

Taylor Roofing · Taylor Construction of North Carolina, Inc. · NC License #80962 · SC License #57076